Sulfuryl Fluoride 1/a, 1 - 5 PPM, (8103471)
Sulfuryl Fluoride 1/a, 1 - 5 PPM, Part # 8103471, 5 Tests
Measuring Range: 1 to 5 ppm
Number of Strokes n: 6
Time for Measurement: approx. 3 min
Standard Deviation: ± 30 %
Color Change: light blue light pink
Ambient Operating Conditions
Temperature: 0 to 40 °C
Absolute Humidity: 15 to 90 % r.h.
At 0 to 10 °C, concentrations of sulfuryl fluoride are displayed with approximately half sensitivity.
At 30 to 40 °C and air humidity < 30 % r.h. the displays can only be recognised as of > 2 ppm.
At 30 to 40 °C and air humidity > 75 % r. h., concentrations of sulfuryl fluoride are displayed with approximately half sensitivity.
a) pyrolysis sulfuryl fluoride HF
b) HF + zircon / quinalizarin pink reaction product (HF destroys the quinalizarin/zircon complex by complexation of the zircon)
Fluorinated hydrocarbons are also displayed with different sensitivities. Ammonia and other basic gases could, depending on the concentrations, either shorten or prevent the color change. The following chemicals have no influence on the display of 3 ppm sulfuryl fluoride: 2 ppm formaldehyde, 5 ppm methyl bromide and 1 ppm phosphine. When the oxygen concentration decreases, the sensitivity decreases. For example, the 3 ppm display at 18 % oxygen is very weak.
Do not use in areas subject to explosion hazards. Tubes get hot. During and shortly after measurement, do not touch the first tube near the black pyrolysis layer.