Geotech SS Geosub Pump & Controller

This stainless steel (SS) sampling pump is the most versatile single stage DC pump in the industry. Designed with all stainless steel components, the SS Geosub allows you to sample with confidence even in the harshest well conditions. The SS Geosub operates with the Geotech SS Geosub Controller.

FEATURES

• Most versatile pump in the industry, sample from depths to 200 ft. (61 m)

• Low flow sampling rates to 10 mL/min

• User enabled dry-run protection

• Easy to decontaminate

• Optional Drop Tube Assembly for greater depth

• Field replaceable motor lead kits available

SPECIFICATIONS

PUMP

Electric:

Full Load Rating - 2/3 HP                                      

Maximum Amp Draw - 35 amps DC 

Overload - Incorporated into SS Geosub Controller                        

Discharge Port Connection:     

1/4" female NPT (includes 3/8" barb)                                   

Operating Conditions:                 

Min. Ambient Fluid Temperature      34°F (1°C)               

Max. Ambient Fluid Temperature      176°F (80°C)

Wetted Parts:  

316 Stainless steel, PTFE, Viton®

Dimensions & Weight (Pump & Motor):                                       

Dimensions of Pump - 13.2" L x 1.75" OD (34cm L x 4.5cm OD)                     

Net Weight of Pump w/o Lead - 4 lbs. (1.8 kg)

CABLE   

Material:     

Two 12 gauge conductors with ETFE jacket, and integrated safety cable

Weight with Georeel & Safety Cable:    

100' (30.5 m) of 12 AWG & Safety Cable  18.3 lbs.(8.3 kg)        

150' (45 m) of 12 AWG & Safety Cable  21.6 lbs. (9.8 kg)        

200' (61 m) of 12 AWG & Safety Cable  24.9 lbs. (11.3 kg)

CONTROLLER

The SS Geosub Controller is designed specifically for use with Geotech’s SS Geosub Pump. It provides a safe conditioned variable DC output power from an AC power source. Built-in sensing gives the operator accurate and precise control over the pump during sampling events. An average 1000 Watt gasoline powered generator with 1 gallon of gasoline can operate the SS Geosub Controller and Geotech’s sampling pump at full power for up to 18 hours continuously (generally much longer runtimes can be expected as the controller is used to reduce water flow for low flow sampling).

FEATURES

• Converts AC Voltage to variable up to 300 watt DC voltage output

• Short circuit protection for your safety

• Heavy duty rated power cable for years of service

• 2-line x 16-character wide temperature range alpha-numeric digital display

• Push button Up/Down control

• Internal processor saves individual well parameters

• Optional DC to AC Inverter can be connected to a vehicle battery

OPERATION

An easy-to-use programmable user interface with bright display offers precise control of flow rates during groundwater sampling events. Site specific settings and conditions can easily be stored and recalled for more efficient repeatable sampling events. Rugged construction and easy to connect cables make setup and portability a breeze. In addition, the controller includes a user programmable dry run protection feature.

SPECIFICATIONS       

Input Power Range:      

100-130 Volts AC, 50/60 HZ 310 Watts, 2.6 amps nominal full load 115 Volts AC

200-250 Volts AC, 50/60 HZ 310 Watts, 1.3 amps nominal full load 230 Volts AC

Output Power:     

Variable 0-46V DC @ <300 Watts

Output Power @ Max. Voltage:     

10 amps maximum                              

Operating Temp:     

-20°F to 100°F (-29°C to 38°C) ambient air temp.

Humidity:     

Up to 90% humidity                                  

Weight of Unit:     

16.45 lbs. (7.46 kg)                                         

Size of Unit:     

16" L x 13" W x 7" H (41cm L x 33cm W x 18cm H)                            

Input Protection:     

5A CB