Portable Geotech SS Geosub Pump & Controller
Geotech SS Geosub Pump & Controller
This stainless steel (SS) sampling pump is the most versatile single stage DC pump in the industry. Designed with all stainless steel components, the SS Geosub allows you to sample with confidence even in the harshest well conditions. The SS Geosub operates with the Geotech SS Geosub Controller.
FEATURES
• Most versatile pump in the industry, sample from depths to 200 ft. (61 m)
• Low flow sampling rates to 10 mL/min
• User enabled dry-run protection
• Easy to decontaminate
• Optional Drop Tube Assembly for greater depth
• Field replaceable motor lead kits available
SPECIFICATIONS
PUMP
Electric:
Full Load Rating - 2/3 HP
Maximum Amp Draw - 35 amps DC
Overload - Incorporated into SS Geosub Controller
Discharge Port Connection:
1/4" female NPT (includes 3/8" barb)
Operating Conditions:
Min. Ambient Fluid Temperature 34°F (1°C)
Max. Ambient Fluid Temperature 176°F (80°C)
Wetted Parts:
316 Stainless steel, PTFE, Viton®
Dimensions & Weight (Pump & Motor):
Dimensions of Pump - 13.2" L x 1.75" OD (34cm L x 4.5cm OD)
Net Weight of Pump w/o Lead - 4 lbs. (1.8 kg)
CABLE
Material:
Two 12 gauge conductors with ETFE jacket, and integrated safety cable
Weight with Georeel & Safety Cable:
100' (30.5 m) of 12 AWG & Safety Cable 18.3 lbs.(8.3 kg)
150' (45 m) of 12 AWG & Safety Cable 21.6 lbs. (9.8 kg)
200' (61 m) of 12 AWG & Safety Cable 24.9 lbs. (11.3 kg)
CONTROLLER
The SS Geosub Controller is designed specifically for use with Geotech’s SS Geosub Pump. It provides a safe conditioned variable DC output power from an AC power source. Built-in sensing gives the operator accurate and precise control over the pump during sampling events. An average 1000 Watt gasoline powered generator with 1 gallon of gasoline can operate the SS Geosub Controller and Geotech’s sampling pump at full power for up to 18 hours continuously (generally much longer runtimes can be expected as the controller is used to reduce water flow for low flow sampling).
FEATURES
• Converts AC Voltage to variable up to 300 watt DC voltage output
• Short circuit protection for your safety
• Heavy duty rated power cable for years of service
• 2-line x 16-character wide temperature range alpha-numeric digital display
• Push button Up/Down control
• Internal processor saves individual well parameters
• Optional DC to AC Inverter can be connected to a vehicle battery
OPERATION
An easy-to-use programmable user interface with bright display offers precise control of flow rates during groundwater sampling events. Site specific settings and conditions can easily be stored and recalled for more efficient repeatable sampling events. Rugged construction and easy to connect cables make setup and portability a breeze. In addition, the controller includes a user programmable dry run protection feature.
SPECIFICATIONS
Input Power Range:
100-130 Volts AC, 50/60 HZ 310 Watts, 2.6 amps nominal full load 115 Volts AC
200-250 Volts AC, 50/60 HZ 310 Watts, 1.3 amps nominal full load 230 Volts AC
Output Power:
Variable 0-46V DC @ <300 Watts
Output Power @ Max. Voltage:
10 amps maximum
Operating Temp:
-20°F to 100°F (-29°C to 38°C) ambient air temp.
Humidity:
Up to 90% humidity
Weight of Unit:
16.45 lbs. (7.46 kg)
Size of Unit:
16" L x 13" W x 7" H (41cm L x 33cm W x 18cm H)
Input Protection:
5A CB